Prague Mosaic Wet Cement Tile

More Views

Prague Mosaic Wet Cement Tile

300 x 300mm

A selection of distinctive neutral colours in small format glazed porcelain, suitable for both wall & floor application, the Prague Mosaic series is ultra-contemporary and super sophisticated.


Material - Porcelain: Fully vitrified tile with water absorption less than 0.5%. They have very low water absorption and are frost-proof so can be used externally in very cold climates. Being strong and non-porous they are also very resistant to staining.  


Edge - Pressed: Pressed tiles are made using standard pressing and firing process in a mould. This means the size of the tiles can vary slightly and allowance needs to be made for this when laying. A larger grout joint is required when laying tiles but this means installation is faster and cheaper. They also hide imperfections in the substrate where a perfect rectified tile may highlight these. Due to the easier manufacturing method, pressed tiles are also generally cheaper to buy and this is reflecting in the RRP price.  

$54.95 per sqm

Was $5995 / sqm

Calculate your tile area

Input the width and height of the area you want to tile so we can calculate the total cost in square metres.

We recommend you add 10% increase for wastage
Add to project

Available for purchase in increments of 0.09 m2 only. The size / qty is rounded to the nearest full tile. A 10% regional surcharge applies at selected regional stores (added at checkout)

Share

You might also like

Specifications

SKU

NT16-1107GM

Size

300 x 300mm

Collection

PRAGUE MOSAICS

Warranty

Standard

Edge

Pressed Edge

Look

Mosaic Decorator

Body

Porcelain Tiles

Surface Finish

Glazed Tiles

Room

Bathroom, Kitchen, Laundry

Colour

Grey

Pendulum Rating

Not Applicable